Skip Menu
People

Alumni

Alumni의 Name, Graduate Degree, Thesis, Workplace / Position에 대한 내용입니다.
Name Graduate Degree Thesis Workplace / Position
Yeon-Jae Jeong Ph.D (2025.02) A Study on Mechanical Evaluation Methodology for Structural Damage of Double Barrier in Membrane Type LNG Cargo Containment System Hyundai Heavy Industries
Dong-Ha Lee Ph.D (2024.08) Study on Vacuum Insulation Systems for Liquid Hydrogen Storage and the Prediction of Boil-off Rate Hydrogen Ship Technology Center
Jeong-Dae Kim Ph.D (2024.02) Experimental and Theoretical Study on Thermal Insulation Schemes for Liquid Hydrogen Storage Tank Hyundai Motor Company
Hyun-Jin Tak Master (2024.02) Structural Assessment of Independent Type C Liquid Hydrogen Fuel Tank Hyundai Heavy Industries
Hyeon-Jong Jeon Master (2024.02) Hollow Glass Microspheres-Epoxy Based Composite Foams for Support Elements of Liquid Hydrogen Vessel Hyundai Heavy Industries
Dong-Hyuk Kang Ph. D (2023.08) Effect of Cryogenic Liquefied Gas Spill on the Welded Steel Plate Korea Marine Equipment Research Institute
Uk-Hwan Jeong Master (2023.08) Experimental Study on the Temperature Gradient of Mark-III LNG Cargo Containment System Hyundai Heavy Industries
Do-Hoon Kim Master (2023.02) Fatigue Life Evaluation of the Membrane-type LNG CCS Primary Barrier by Pressure Amplitude Korea Aerospace Industries (KAI)
Young-Hwan Choi Master (2023.02) Effect of Hydrogen Embrittlement and Pre-strain of Austenitic Stainless Steel under Cryogenic Environment Korea Marine Equipment Research Institute
Dae-Hee Kim Master (2023.02) Applicability Evaluations of PVC-type Foam Material in the Cryogenic Environment Hanwha Ocean
Sung-Gyu Jeon Master (2023.02) Experimental Investigation of Falling-Object-Induced Structural Failure of Corrugated Plate and Suggestion of Numerical Approach for LNG Cargo Containment System Hyundai Heavy Industries
Seok-Min Kim Master (2023.02) Evaluation of Impact Behavior of SUS304L Steel Plate Under Cryogenic Temperature Hyundai Motor Company
Seung-Gil Bang Master (2022.08) Evaluation of Application of Glass/Aramid Fabric Reinforced Composite for Secondary Barrier of LNG CCS Korea Shipbuilding & Offshore Engineering
Dong-Ju Yeom Master (2022.08) Experimental Study of Mechanical Properties for LNG CCS Barriers in Crygenic Environment Korea Shipbuilding & Offshore Engineering
Jin-Seok Park Master (2022.02) Effect of Eco-friendly Blowing Agent, HCFO-1233zd on the Polyurethane Foam for Application to Cryogenic Environments Samsung Electronics
Yong-Cheol Jeong Master (2022.02) Cryogenic Reliability of a Flexible Secondary Barrier in Association with the Level Difference and Adhesive Filling Ratio for LNG Container Cargo Containment System Samsung Heavy Industries
Teak-Keon Kim Ph. D (2021.08) Dynamic Response of Drill Floor Systems under Blowout-Induced Explosions and Engulfed Fires Samsung Heavy Industries
Jin-Yeon Kim Master (2021.02) Effects of Ultrasonic Dispersion on Polyurethane Foam Reinforced by Nanoparticles Hyundai Heavy Industries
Hee-Tae Kim Master (2021.02) Compressive Mechanical Behavior of Hollow Glass Microsphere Reinforced Polyurethane Foam Composites Full time Ph.D
Yeon-Jae Jeong Master (2021.02) Investigation of Thermomechanical Performance Considering Anisotropic Characteristics of Glass Fiber-Reinforced Composites Full time Ph.D
Myung-Sung Kim Ph.D (2021.02) A Study on Impact Failure of Materials and Structure Applied to LNG Cargo Containment System Korea Institute of Machinery & Materials
Jin-Ho Bae Master (2020.02) Thermal and Mechanical Behavior of Insulation Materials under Cryogenic Temperature and Significant LNG Sloshing Impact Loading Full time Ph.D (KAIST)
Young-Moo Son Master (2020.02) Analysis on Material Properties and Molecular Structure of Polyurethane Foam Manufactured by Mixture Blowing Agent Hyundai Heavy Industries
Dong-Ha Lee Master (2020.02) Impact Behavior of Hollow Glass Bubble Reinforced Foam Core Plywood Sandwich Panel in Cryogenic Temperature Full time Ph.D
Seung-Joo Cha Master (2020.02) Experimental Study of Temperature Effects on the Mechanical Behaviour of Plywood used in Membrane-type LNG Cargo Containment System KC LNG Tech
Jong-Min Choi Master (2020.02)
Jae-Sik Hwang Master (2020.02) A Study on Application of PTFE Coating to Improve Hydrogen Embrittlement Resistance Samsung Heavy Industries
Byeong-Kwan Hwang Master (2020.02) Evaluation of Low-Temperature Properties of a Polyurethane Foam with Various Densities under Dynamic Loading Conditions KC LNG Tech
Jae-Ik Jo Master (2020.02) A Study on Method for Efficient Arrangement of Tank Supports for LPGC Hyundai Heavy Industries
Tae-Hyung Lee Master (2020.02) Analysis and Study on the Internal Behavior of Cargo Tank in the Application of Tandem Block Method of LNG ships Samsung Heavy Industries
Hak-Kyung Kim Master (2020.02) Evaluation of the influence of the final strength according to the angle of the penetrations of the submarine pressure hull subject to internal/external pressure Korean Register
Byeong-Yeop Yang Master (2020.02) A Study on the Change Reaction Load at Keel Block in Docking Condition due to Ambient Temperature Samsung Heavy Industries
Won-Ki Kang Master (2019.08) Hyundai Heavy Industries
Hyo-Sun Choi Master (2019.08) A study on the improvement of Fatigue Strength of scarfing bracket for naval ships Korean Register
Cheol-Yeon Jeong Master (2019.08) Samsung Heavy Industries
Si-Yeol Sung Master (2019.08) Daewoo Shipbuilding & Marine Engineering
Sang-Jin Park Master (2019.08) Samsung Heavy Industries
Il-do Kim Master (2019.08) Samsung Heavy Industries
Hak-Kyoung Kim Master (2019.08) Korean Register
Jin-Su Kim Master (2019.08) Parametric Study of Stick Slip Phenomenon for Loadout Breakout Hyundai Heavy Industries
Seong-Ho Kim Master (2019.08) The Computational Study of Soil-Structure Interaction Effect by Comparing Impact Behavior of Offshore Pipeline Hyundai Engineering
Nguyen Le Thanh Hung Master (2019.08) Hydrogen Embrittlement of 316L Stainless Steel at Ambient and Cryogenic Temperatures Viettel Mobile
Tran Van Hung Master (2019.08) Effect of Cellulose Nanocrystalline on Thermal and Mechanical Characteristics of Polyurethane Composite Daejeon Institute of Science and Technology (Ph.D course)
Le Trong Dai Master (2019.08) Investigation of Cryogenic Liquid Leakage Effect on Structural Components Using Experimental and Numerical Approach TST Corporation
Jong-Ho Oh Master (2019.08) Mechanical Property Enhancement by Kevlar Pulp Adding for Low Temperature Insulation Purpose
Tae-Wook Kim Ph.D (2019.02) Effect of Environmental Conditions on Mechanical Performance of Insulation Materials Korea Research Institute of Ships & Ocean Engineering (KRISO)
Jung-Chul Hwang Master (2019.02) Development the Structural “Compartment” Method of LNG Tank Seat for LNG Fueled Shuttle Tanker in Basic Structural Design Phase Samsung Heavy Industries
Jeong-Dae Kim Master (2019.02) Reinforcement of Mechanical Properties Using Glass Fiber Polyisocyanurate Full time Ph.D
Gi-Beom Park Master (2019.02) A Study on Investigation of Constraint Conditions for Material Testing for Polymeric Materials Full time Ph.D
Woo-Sik Kwak Master (2019.02) Hyundai Heavy Industries
Jae-Hyeok Ahn Master (2019.02) Hyundai Heavy Industries
Hyun-Soo Kim Master (2018.08) Effect of Accidental Spillage of Cryogenic Liquid on Cleavage Fracture of Marine Grade Steel Daewoo Shipbuilding & Marine Engineering
Won-Jun Chung Master (2018.08) Forensic Engineering Approach for Safety Evaluation of Capsizing Accident of Deep Cement Mixing Vessel Agency for Defense Development (ADD)
Sun-Beom Kwon Master (2018.08) A New Direct Time Integration Method for Stress Wave Propagations Hyundai Heavy Industries
Yu-Rim Lee Master (2018.08) Experimental Investigation of Effect of Cryogenic Liquid Exposure on Fracture of Structural Members Korea Aerospace Industries (KAI)
Myung-Soo Park Master (2018.08) Standardization of the Lashing Bridge Under Reinforcement For Large Container Ship Hyundai Heavy Industries
Dong-Man Ryu Ph.D (2018.02) Comparative Study on Mechanical Behavior of Subsea Pipeline under Impact Load and Pressure
Ju-Yung Son Master Mechanical Performance of Cryogenic Insulation System under Repeated Impacts
Jong-Min Kim Master (2017.02) Synthesis and Characterization of Carbon Filler-Reinforced Polyurethane Foams
Jeong-Ho Lee Master (2017.02) Development of Constitutive Model for Polyurethane Foam to Evaluate Structural Integrity and Performance of Insulation Structure System modify Boston University (Ph.D course)
Jong-Hwan Kim Master (2017.02) A Study on the Description of Tensile Behavior of High Manganese Steel Based on the Elasto-plastic Damage Model Renault Samsung Motors
Zakaria Rachadi Master (2016.08) Experimental Investigation on the Ultimate Buckling Strengh of Perforated and Curved Plates and Suggestion of Design Curves Samsung Heavy Industries
Wenzheng Xu Master (2016.08) Estimation of Corroded Pipeline Burst Pressure: Comparative Study on Experimental Investigation, Numerical Analyses and Design Codes Full time Ph.D
Jeong-Hyeon Kim Ph.D (2016.02) A Study on Failure Characteristics and Viscoplastic-Damage Model of the Cryogenic Materials for Liquefied Natural Gas Insulation System post Ph.D. at PNU NAOE BK21PLUS
Seul-Kee Kim Ph.D (2016.02) A study on the deformation and perforation problem for steel plastes subjected to high-speed collision Post Ph.D. at Cryogenic Material Research Center
Myung-Sung Kim Master (2016.02) Constitutive Model for Porous Composite Material and Application to FEA Full time Ph.D
Shin-Seok Song Master (2016.02) A Study for Numerical Simulation about HullDamage for Container Loading Impact Hyundai Heavy Industries
Hyang-Duk Seo Master (2016.02) The Study of Differences between Buckling Strength in Harmonized CSR and Ultimate Buckling Strength for Perforated plate Sungdong Shipbuilding & Marine Engineering
Myoung-Gu Kim Master (2016.02) Experiments for Ultimate Strength of Perforated Plate and Suggestion of Design Formulae Sungdong Shipbuilding & Marine Engineering
Won-Do Jung Master (2016.02) Low-Temperature Mechanical Characteristics of Polymers for Pipelines Using in Ship and Offshore Structures SEOYON E_HWA
Seong-Bo Park Master (2016.02) Compressive Failure Characteristics of Polymeric Foams under Cryogenic Temperatures Hyundai Heavy Industries
Kwang-Ho Choi Master (2016.02) Comparision of Computational and Analytical Methods for Evaluation of Failure Pressure of Subsea Pipelines Containing Internal and External Corrosions KOREA GAS CORPORATION
Myung-Ji Sim Master (2016.02) A Study on Thermal-Mechanical Analysis for Design of LNG Fuel Vessel Piping System NK
Doo-Hwan Park Master (2016.02) A study on Cryogenic Mechanical Behavior of 5000- and 6000-series Aluminum Alloys
Jae-Hoon Lee Master (2015.02) Development of Block Lifting Simulator Samsung Heavy Industries
Byoung-Cheol Kwon Master (2015.02) Development of Empirical Formula for Equivalent Gas Explosion Pressure on FPSO Topside Case Western Reserve University Civil Engineering (Ph.D course)
Myung-Soo Kim Master (2015.02) Low-temperature Mechanical Behavior of Super Duplex Stainless Steel Considering Welding Effect Full time Ph.D
Ki-Yeob Kang Master (2014.02) Structural responses analysis for FPSO topside platform by the characteristics of explosive pressure Full time Ph.D
Yong-Jun Park Master (2014.02) Optimization of deck-mounting type helideck using F.E. analysis Hyundai Heavy Industries
Jun-Hwan Jeon Master (2014.02) Safety assessment of offshore plant helideck subjected to helicopter collision impact Samsung Heavy Industries
Kwang-Jun Park Master (2014.02) Experimental investigations for material characteristics of random glass mat reinforced thermoplastic under cryogenic thermal cycles for offshore structures application Daewoo Shipbuilding & Marine Engineering
Yun-Hyuk Choi Master (2013.08) Development of test method for ship impacts with level ice Agency for Defense Development (ADD)
Gi-Beak Kim Master (2013.02) Contemplate study on research equipments ship bottom sensor design for marine survey/research vessel STX OFFSHORE & SHIPBUILDING
Chi-Seung Lee Ph.D (2013.02) Unified Elasto-Viscoplastic-Damage Models for Cryogenic Materials and Their Application to Finite Elements Assistant Professor, Dept. of Medical Science, School of Medicine, PNU
Jeong-Hyeon Kim Master (2013.02) Numerical model for pre-strain dependent material behavior Full time Ph.D
Seul-Kee Kim Master (2013.02) Computational evaluation of cryogenic fracture toughness of SUS304L Full time Ph.D
Joo-Hyun Kim Master (2013.02) A study on structural performance of perforated plate according to various reinforcements Hyundai Heavy Industries
Chang-Hun Lee Master (2013.02) A study on aging effect on mechanical properties of offshore structure composties Daewoo Shipbuilding & Marine Engineering
Ji-Hyun Jeong Master (2012.08) Development of static/dynamic strength features for insulation system of LNG carriers American Bureau of Shipping(ABS)
Dong-Kuk Kim Master (2012.08) Response of submarine pressure hull to shock wave generated by underwater explosion Hyundai Heavy Industries
Jong-Won Lee Master (2012.08) Reinforcement methods of perforated plate around the cutout Korean Register of Shipping (KR)
Hye-Yeon Choi Master (2011.02) The fracture of fresh water ice and development of design ice load Samsung Heavy Industries
Haeng-Seong Heo Master (2011.02) Hydroelastic structure analysis of LNG carrier tank under sloshing Daewoo Shipbuilding & Marine Engineering
Byung-Moon Yoo Master (2011.02) Numerical approach for predicting the crack propagation of stainless steel plate under cryogenic temperature Samsung Heavy Industries
Jae-Woo Ahn Master (2011.02) A study on development of damage model for fresh water ice Daewoo Shipbuilding & Marine Engineering
Woong-Sup Park Master (2011.02) Development of unified damage model of cryogenic materials for shipbuilding industry Daewoo Shipbuilding & Marine Engineering
Hong-Jip Jeong Master (2010.08) A study on strength evaluation of adhesive joints DOOWON R&D CENTER
Min-Sung Chun Master (2010.02) A study on structural performance evaluation for membrane type LNG insulation system Samsung Heavy Industries
Kyung-Joon Lee Master (2010.02) A study on development of cryogenic constitutive equations for austenitic stainless steel LG Electronics
In-Beum Park Master (2010.02) Structural capacity evaluation of KC-1 type LNG carrier insulation system LG Electronics
Jae-Shin Yoo Master (2010.02) Development of numerical analysis model applicable for crack problems of stainless steel structures Kumho Tires
Sung-Won Yoo Master (2010.02) Development of temperature and strain-rate dependent damage model of TRIP steels for low temperature applications University of Tokyo (Ph.D course)
Dong-Min Keum Master (2010.02) Design of an oceanographic buoy Korean Register of Shipping (KR)
Jin-Han Hong Master (2010.02) A study on numerical simulation of safety evaluation for pilot operated cryogenic safety relief valve Korean Register of Shipping (KR)
Jun-Hwan Lee Master (2010.02) A study on impact characteristics of LNG carrier insulation system
Eui-Joon Kim Master (2009.08) Comparative study on the FEM analysis of special ship's amidship structure Korean Register of Shipping (KR)
Tae-Woo Kim Master (2009.02) An experimental and numerical study for dynamic strength characteristics of LNGC insulation system (KC-1) Samsung Heavy Industries
Young-Hwan Kim Master (2009.02) A study on the safety assessment method about FRP yacht based on continuum damage mechanics Lloyd`s Register
Chi-Seung Lee Master (2009.02) A study on the development of numerical analysis model based on continuum damage mechanics for fatigue assessment of welded structures Full time Ph.D
Hoon-Kyu Oh Master (2009.02) A Study on the impact response analysis of membrane type LNGC cargo containment system with respect to ice collision Hyundai Heavy Industries
In-Sung Park Master (2008.02) A study on the optimum arrangement of double bottom structure for LNG carrier Samsung Heavy Industries
Dong-Cheol Kim Master (2009.02) Fatigue analysis of dump chute pipe for semi-submersible rig Samsung Heavy Industries
Dae-Suk Han Master (2007.02) Development of a damage simulator based on contiuum damage mechanics Full time Ph.D
Woo-Chul Choi Master (2006.02) Database construction for dynamic strength characteristics of LNG carrier insulation sy Hyundai Heavy Industries
Jeong-Do Moon Master (2006.02) A study on the dynamic strength features for cargo containment system of membrane type LNGC STX OFFSHORE & SHIPBUILDING
Hong-Min Choi Master (2005.08) Development of an expert system for the fatigue assessment of weldment KIA MOTORS
Jin-Seok Park Master (2005.08) Development of static/dynamic strength features for insulation system of LNG carriers American Bureau of Shipping(ABS)
Suk-Hee Won Master (2005.08) A study on the deformation and perforation problem for steel plastes subjected to high-speed collision Samsung Heavy Industries